Check Valves
Description
Symbol
Cross Section
Cavity Details
38
Technical Features
SAE09
Hybrid SAE Cartridge - 420 bar
Direct acting - Ball type
CVH0.S09 Valve Series
A screw-in, cartridge style, direct
acting, ball type check valve. Main use
is as a blocking or load-holding device.
The CVH0.S09 allows flow passage
from port 1 to 2: the cartridge has a ful-
ly guided check which is spring-biased
closed until sufcient pressure is ap-
plied at port 1 to open to 2. The flow is
blocked in the opposite direction (2 to 1).
All external surfaces are zinc plated and
corrosion-proof. All valve parts are made of
high strength steel. Compact size.
Industry common used hybrid cavity
“SAE09”.
Technical Data
39
Specications may change without notice.
Flow (l/min)
Ordering Code
Pressure (bar)
Performance Details
Maximum operating pressure 420 bar
Maximum flow 50 l/min
Cracking pressure See table below
Maximum Internal Leakage
0,10 cm
3
/ min @ 10 bar
0,10 cm
3
/ min @ 420 bar
External component treatment
Zn/Fe - standard (96h)
Zn/Ni (720h)
O-ring Temperature Range -30° C to 110° C (standard sealing NBR - BUNA-N)
Oil Temperature Range -30° C to 110° C
Fluids Mineral - based or synthetics with lubricating properties
Viscosities 7,4 to 420 cSt
Filtration 20/18/15 ISO 4406 (maximum ltration admitted)
Orientation No restrictions
Installation torque 40-45 Nm
Technical Specications for characterization see page 480
Oil testing condition ISO VG 46 cSt
Seal kit code SK.031
Weight 0,060 kg
Note: The performance chart il-
lustrates flow handling capacity.
p/Q curves are recorded at
TOil = 40°C and 46 cSt
